Measured Maker

Quilt Backing and Binding Yardage

How much backing to buy for a quilt top, in quilting cotton or wide backing, which way to run the seam, and the binding strips to cut.

Units
Quilt top

Ask your long-arm quilter what they need.

Backing fabric

Width between the selvedges. A bolt sold as 108 in wide often measures 104 to 106 in; measure yours, or type 104.A bolt sold as 108 in (274 cm) wide often measures 264 to 269 cm; measure yours, or type 264.

Binding

Panel layout for a throw

Backing panels for a 45 x 60 inch quiltThe 53 by 68 inch backing is made of 2 lengths of 53 inches joined with a seam that runs across the quilt; the quilt top sits 4 inches inside each edge.quilt top 45 x 60 inbacking 53 x 68 inpanel 1: 53 in longpanel 2: 53 in longseam runs across
The backing for the first worked example, with the seam where the calculator puts it.

Seam across, or down the length?

A backing narrower than its fabric needs one width; wider than that, it needs panels. Which way the seam runs changes how much you buy, because the panel length is the side of the backing it runs along.

The calculator tries both and keeps the cheaper one. If your quilter or the print wants a particular direction, compare the other figure it shows.

Batting, and backs a little wider than the fabric

Batting is cut to the same size as the backing, not the top. A 72 x 90 in quilt has an 80 x 98 in back, so the Queen package is the smallest that covers it; the table below lists every package.

When the back is only a little wider than one width of cotton, a full length plus a half-width strip often costs less than two full lengths. The buy list shows that option whenever it saves fabric.

Quilts worked through

  • 45 x 60 in throw on quilting cotton: The back must be 53 x 68 in. Two 53 in lengths joined along their long edges cover it with the seam running across: 106 in, 2.94 yd, so buy 3 yd. A seam down the length would need 3 7/8 yd.
  • 72 x 90 in twin: The back is 80 x 98 in. Two 98 in lengths joined side by side use 5.44 yd: buy 5 1/2 yd. On wide backing the 98 in side lies across the bolt and you buy a single 80 in length: 2 1/4 yd, with no seam.
  • 30 x 36 in baby quilt: The back is 38 x 44 in, narrower than quilting cotton, so one 44 in length works: 1 1/4 yd. Binding: 132 in around the edge plus the joins is 142 in, which is 4 strips, 3/8 yd.
  • Narrower binding strips: The 72 x 90 in twin needs 334 in of binding. In 2.25 in strips that is still 8 strips, but they fit in 1/2 yd instead of 5/8 yd.
  • 45 x 60 in throw, one and a half widths: One 68 in length plus a 34.5 in length split down the middle and joined end to end covers the back for 2 7/8 yd instead of 3 yd. It works while the back is no wider than 62 in.

Backing and binding for common quilt sizes

4 in of extra backing on each side, 0.5 in seams, yardage rounded up to the next eighth of a yard. Skip to the calculator

Quilt topQuilting cotton (42 in)Wide backing (104 in usable)Binding (2.5 in strips)
30 x 36 in1 1/4 yd1 1/8 yd4 strips, 3/8 yd
45 x 60 in3 yd1 1/2 yd6 strips, 1/2 yd
50 x 70 in3 1/4 yd1 5/8 yd6 strips, 1/2 yd
72 x 90 in5 1/2 yd2 1/4 yd8 strips, 5/8 yd
84 x 92 in7 3/4 yd2 5/8 yd9 strips, 5/8 yd
100 x 100 in9 yd6 yd10 strips, 3/4 yd

Wide backing is sold as 108 in but measures 104 to 106 in between the selvedges, so the wide column uses the narrow end and never comes out short. Type your own measured width in the calculator.

Open the calculator

Batting packages and what they cover

Pre-cut Warm & Natural batting comes in five package sizes. The last column takes off the backing margin the calculator starts with, so you can see at a glance which package a quilt top needs.

PackageSizeLargest quilt top it covers (4 in extra all round)
Baby45 x 60 in37 x 52 in
Twin72 x 90 in64 x 82 in
Full90 x 96 in82 x 88 in
Queen90 x 108 in82 x 100 in
King124 x 120 in116 x 112 in

Other brands cut their packages to other sizes; check the label, or buy batting from the roll.

Twin, Full, Queen and King sizes from The Warm Company's own product pages; the Baby size is not printed there, so it is taken from Linda's Electric Quilters, a quilting retailer. The last column is worked out here.

How the yardage is found

The backing is the quilt top plus the extra on every side. The calculator finds the fewest panels that cover the side lying across the fabric (each seam uses a little width from both panels), multiplies by the other side, tries both seam directions and keeps the shorter yardage. Binding is the perimeter plus an allowance for corners and joins, cut in strips across the binding fabric.

Defaults you can change, and why they are set this way:

  • 1/2 in backing seams: A wider seam than the usual 1/4 in piecing seam is common for backings; you can change it
  • 2.5 in binding strips: 2.5 in double-fold binding is the most common width; you can change it
  • round up to 1/8 yd: US fabric shops commonly cut in eighth-yard steps
  • 42 in usable cotton: Quilting cotton is sold 42 to 44 in wide and the selvedges are trimmed off
  • 10 in extra binding: Corners, strip joins and the final overlap use roughly this much; quilters vary it by method
  • 104 in usable wide backing: Wide backing is sold as 108 in but often measures 104 to 106 in between the selvedges, and counting the narrow end means the amount never comes up short

Sources:

Backing questions

Is wide backing cheaper?

It saves seams, and for a twin or larger it often needs well under half the yardage: 2 1/4 yd instead of 5 1/2 yd for a 72 x 90 in quilt. Compare the price per yard before deciding.

How much bigger than the top should the backing be?

Enough that the back cannot come up short as the layers shift. The calculator starts at 4 in per side, what many long-arm services ask for; some want more, so ask yours.

Quilts it was tested on

10 quilts were worked through step by step, separately from the calculator code: 9 are plain arithmetic and 1 is checked against published package sizes. A build in which any of them comes out differently is stopped.

QuiltWhat the calculator has to sayWorked through
Quilt top 45 x 60 in, backing fabric 42 in widebacking 53 x 68 in, 2 widths joined, buy 3 yd, 6 binding stripsThe back is 45 + 8 by 60 + 8, so 53 x 68 in. Two widths joined cover 2 x 42 - 1, which is 83 in, more than 68, so cut two 53 in lengths: 106 in, 2.94 yd, bought as 3 yd. Binding: 2 x (45 + 60) + 10 is 220 in; 220 / 42 is 5.2, so 6 strips.
Quilt top 100 x 100 in, backing fabric 42 in wideon wide backing 6 yd in 2 piecesThe back is 108 x 108 in, wider than the 104 in counted as usable, so two 108 in lengths are needed: 216 in, exactly 6 yd.
Quilt top 72 x 90 in, backing fabric 42 in widethe Queen batting packageThe back is 80 x 98 in. The Twin package, 72 x 90 in, is too small and the Full, 90 x 96 in, is 2 in short; the Queen, 90 x 108 in, covers it (package sizes as published for Warm & Natural batting).
Quilt top 30 x 36 in, backing fabric 42 in wideon wide backing 1 1/8 yd in one piece, the wide backing line is on the buy listThe back is 38 x 44 in. One width of wide backing, counted as 104 in across, is wider than either side, so the shorter side, 38 in, is all you cut: 1.06 yd, bought as 1 1/8 yd. Quilting cotton needs 1 1/4 yd for the same quilt, so the buy list shows the wide backing line.
Quilt top 20 x 24 in, backing fabric 42 in wide, 2 in of extra backing per sideon wide backing 3/4 yd in one piece, no wide backing line on the buy list, since it would save nothingThe back is 24 x 28 in. Quilting cotton already covers it in one piece: 24 in is 0.67 yd, bought as 3/4 yd. Wide backing would also be 3/4 yd, so it saves neither fabric nor a seam and the buy list leaves the line out.

Plan extra for

  • Prints that must match across a seam, directional prints and pieced backs need extra fabric.
  • Pre-washing shrinkage is not added.
  • Bias binding uses more fabric than the straight strips counted here.

More sewing and quilting tools

All sewing, quilting & needlework calculators