Measured Maker

Ruffle Fabric Calculator

Work out how long the strip for a gathered ruffle must be, how many strips to cut across the fabric and how much fabric to buy.

Ruffle

Measure the finished edge: a hem, a pillow edge, a valance.

Width between the selvedges; strips run across it.

Flat strip versus gathered ruffle

A ruffle strip before and after gatheringA flat strip 225 inches long, made of 6 joined pieces (red lines are the joins), is gathered to fit a 90 inch edge at 2.5 to 1 fullness.flat strip: 6 pieces joined, 225 in longgathered onto the 90 in edge (2.5 to 1)90 in
Drawn to scale for the first worked example; red lines are the joins.

How full should a ruffle be?

Twice the edge length is the usual fullness and suits most cottons. Light fabrics such as voile or lawn look better fuller, at two and a half to three times; heavy fabrics such as denim or wool gather better at one and a half times.

If you are unsure, gather a short test strip of your fabric at two to one and pin it to the edge before cutting the rest.

Fabric for a 3 in ruffle at 2 to 1

Cut width 4.5 in (1 in hem, 0.5 in seam), strips cut across 44 in fabric, rounded up the same way as the calculator. Skip to the calculator

Edge lengthStrip to gatherStripsFabric
60 in120 in33/8 yd
90 in180 in55/8 yd
120 in240 in63/4 yd
160 in320 in81 yd
200 in400 in101 1/4 yd

For another width, fullness or fabric, use the calculator.

Open the calculator

Cutting chart for a finished ruffle

Fabric to buy for a 4 in finished ruffle (strips cut 5.5 in wide across 44 in fabric), for common edge lengths at each fullness. Print it for the cutting table.

Edge to ruffle1.5 times full2 times full2.5 times full3 times full
36 in3/8 yd (2 strips)3/8 yd (2 strips)1/2 yd (3 strips)1/2 yd (3 strips)
60 in1/2 yd (3 strips)1/2 yd (3 strips)5/8 yd (4 strips)7/8 yd (5 strips)
90 in5/8 yd (4 strips)7/8 yd (5 strips)1 yd (6 strips)1 1/8 yd (7 strips)
120 in7/8 yd (5 strips)1 yd (6 strips)1 1/8 yd (7 strips)1 3/8 yd (9 strips)
180 in1 1/8 yd (7 strips)1 3/8 yd (9 strips)1 3/4 yd (11 strips)2 yd (13 strips)
240 in1 3/8 yd (9 strips)1 7/8 yd (12 strips)2 1/4 yd (14 strips)2 5/8 yd (17 strips)

A wider ruffle or narrower fabric changes every cell; use the calculator for those.

Computed for this page from the ruffle arithmetic below, not copied from a sewing reference. Each cell runs the calculator with the default hem, seam allowance and fabric width: strips = edge x fullness / (fabric width minus a seam allowance at each joined end), rounded up; fabric = strips x cut width, rounded up the same way as the calculator.

Worked ruffles

  • 3 in ruffle in light cotton lawn on a 90 in hem, 2.5 to 1: The strip is 90 x 2.5 = 225 in long and cut 4.5 in wide. Each 44 in strip gives 43 in after the join seams, so 6 strips use 27 in: buy 3/4 yd.
  • 6 in ruffle on a 160 in edge, 54 in decor fabric: At 2 to 1 the strip is 320 in long and 7.5 in wide; 53 in usable per strip means 7 strips, 52.5 in of fabric: buy 1 1/2 yd.
  • Narrow 2.5 in frill at 3 to 1 on a 64 in edge: Very full gathers need a 192 in strip: 5 strips of 4 in use 20 in, so 5/8 yd.
  • Metric: 8 cm ruffle on a 180 cm edge: With a 2 cm hem, 1.5 cm seam, 2 to 1 fullness and 140 cm fabric the strip is 360 cm long: 3 strips of 11.5 cm, 34.5 cm, so 0.4 m.

The arithmetic

Cut width = finished width + hem + seam allowance. Strip length = edge length x fullness. Each strip gives the fabric width minus two seam allowances, so strips = strip length / that, rounded up. Fabric = strips x cut width, rounded up to the next eighth of a yard (10 cm in metric).

Defaults you can change, and why they are set this way:

  • rounded up to 1/8 yd (10 cm in metric): Fabric shops in the US cut in eighth-yard steps; rounding further up is your choice
  • 1 in hem, 1/2 in seam, 44 in fabric: Hems and seams vary by pattern and 44 in is a common width for cotton; all three are inputs

Sources:

Ruffles on record

Before this page is published the calculator has to match 6 ruffles whose strips and yardage were written out step by step, separately from the calculator code, including two that land exactly on a boundary.

RuffleExpectedArithmetic
120 in edge, 4 in ruffle, 2 times full, 44 in fabric6 strips, each cut 5.5 in wide, buy 1 ydEach strip is 4 + 1 + 0.5, so 5.5 in wide. The joined strip has to be 120 x 2, which is 240 in; each strip gives 44 - 1, so 43 in, and 240 / 43 is 5.58, so 6 strips. 6 x 5.5 is 33 in, bought as 1 yd.
86 in edge, 3 in ruffle, 1.5 times full, 44 in fabric3 strips86 x 1.5 is 129 in, exactly three strips of 43 in, so 3 strips and not 4.
160 in edge, 6 in ruffle, 2 times full, 54 in fabric7 strips, each cut 7.5 in wide, buy 1 1/2 ydStrips are 6 + 1 + 0.5, so 7.5 in wide. 160 x 2 is 320 in; 320 / 53 is 6.04, so 7 strips. 7 x 7.5 is 52.5 in, 1.46 yd, bought as 1 1/2 yd.
5000 in edge, 4 in ruffle, 2 times full, 44 in fabricno answer, and a message that gives the range the edge can be, 1 in to 2000 inAn edge of 5000 in is more than the 2000 in the calculator accepts, so it gives no answer and says the edge can be 1 in to 2000 in.

Ruffle questions

How do I make a folded ruffle?

A folded strip has no hem: it is cut twice the finished width plus two seam allowances. Enter twice the finished width plus one seam allowance as the ruffle width and 0 as the hem; the calculator adds the second allowance. For a 3 in folded ruffle with 0.5 in seams, type 6.5 in and cut each strip 7 in wide.

Why is each strip shorter than the fabric is wide?

Strips are joined end to end, and every join uses a seam allowance from both strips. Counting that keeps the joined strip from coming out short.

Not covered

  • Bias-cut and circular ruffles use a different layout.
  • One-way prints and stripes that must line up can need extra fabric.

Other sewing calculators

All sewing, quilting & needlework calculators